View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

3D Model Datasheet

MSD1583-153

Name: MSD1583-153MED
Brand: Coilcraft
SKU: MSD1583-153MED
Price: 1.56 USD
Availability: InStock

MSD1583-153MED

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

個数	単価
1	$3.95
300	$2.59
600	$1.56
1200	$1.21
2400	$1.04
4800	$0.96

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

E = Matte tin over nickel

Packaging

D = 13" machine-ready reel

Tolerance

M = 20%

. 在庫あり、即日出荷可能.

サンプルを依頼:

デザイナーズキット:

キット	値	価格
C463	41 (3 of each)	$160.00

仕様

Electrical specifications at 25°C.

フライバック用途

部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±20%)	DCR (Ω) 3		絶縁電圧 (V)	漏れインダクタンス (nH) 5	巻数比
部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±20%)	typ	max	絶縁電圧 (V)	漏れインダクタンス (nH) 5	巻数比
MSD1583-153ME_	15	0.039	0.045	500	380	1 : 1

SEPIC用途

部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±20%)	DCR (Ω) 3		SRF typ (MHz) 4	結合係数	漏れインダクタンス (nH) 5	Isat (A) 6			Irms (A)
部品番号 1 (Hover for schematics)	インダクタンス (µH) 2 (公差: ±20%)	typ	max	SRF typ (MHz) 4	結合係数	漏れインダクタンス (nH) 5	10% drop	20% drop	30% drop	両方の巻線 7	単一巻線 8
MSD1583-153ME_	15	0.039	0.045	12.0	0.99	380	9.5	10.8	11.8	3.2	4.5

メモ

When ordering, please specify termination and packaging codes: e.g. MSD1583-105KEC
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
For SEPIC: When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
For SEPIC: When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage inductance is for L1 and is measured with L2 shorted.
Isat: DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

終端処理:

E = Halogen free component. RoHS compliant matte tin over nickel over phos bronze terminations.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +85°C with (40°C rise) Irms current

保管温度範囲:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+125°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Current

Inductance vs. Frequency

回路図

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
300	330	100	13	38,4	32,4	32	24	4	2	8,6	0,5

一般仕様

コア材料:

Ferrite

重量:

3.7 – 4.4 g

パッケージ:

300/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 8.6 mm pocket depth.

Winding to Winding Isolation:

500 Vrms, one minute

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested with pure water or alcohol only. More info.

MSD1583-153

MSD1583-153MED