3D Model Datasheet SPICEモデル SPICE S-Param

026011F (0703) Series

Optimized Wirewound Ferrite Beads

Our 026011F (0603) Series wirewound ferrite beads achieve even higher optomized impedance and lower DCR than our 0201AF Series in a slightly taller height, still only 0.55 mm max. Ferrite construction and heavy gage wire means high current handling for 0201 size. Extremely low DCR assures lowest insertion loss for high efficiency in mobile applications. These tiny beads eliminate noise in small power supplies and provide isolation of RF signals.

Optimized 0201 size – 0.7 × 0.3 × 0.55 mm high
High impedance for RF isolation in cellular applications
Higher inductance values than other 0201 inductors – up to 560 nH
Ferrite construction for high current handling

今すぐ購入:

部品番号

部品を検索

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C474	7 (20 of each)	$45.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (nH) 2 (公差: ±5%)	インピーダンスタイプ (Ω)		SRF typ (GHz) 3	DCR max (Ω) 4	Irms (mA) 5
部品番号 1	インダクタンス (nH) 2 (公差: ±5%)	100 MHz	900 MHz	SRF typ (GHz) 3	DCR max (Ω) 4	Irms (mA) 5
026011F-270XJR_	27	16.60	133.70	3.9	0.125	480
026011F-720XJR_	72	42.10	353.70	2.6	0.460	210
026011F-101XJR_	100	59.20	506.10	2.3	0.570	200
026011F-151XJR_	150	91.52	747.20	1.8	0.680	190
026011F-271XJR_	270	154.40	1434.00	1.6	1.300	130
026011F-431XJR_	430	253.00	2507.00	1.1	2.100	100
026011F-561XJR_	560	320.50	3435.00	1.0	3.100	90

メモ

When ordering, please specify packaging code: e.g. 026011F-561XJRY
Inductance measured at 7.9 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer.
SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
DCR measured at 25°C on a Keithley 580 Micro-ohmmeter (or equivalent) and a Coilcraft CCF1192 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
Irms: Current that causes a 15°C temperature rise from 85°C ambient. This information is for reference only and does not represent absolute maximum ratings. Because of their open construction, these parts will not saturate. Because of their open construction, these parts will not saturate.

終端処理:

RoHS compliant, matte tin over nickel over silver platinum-glass frit.

パッケージ:

W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Y = 7″ machine-ready reel. EIA-481 punched paper tape (10,000 parts per full reel).
U = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from U to W.

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +85°C with Irms current

保管温度範囲:

Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+100°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs. Frequency

Impedance vs. Frequency

物理的特徴

A max	B max		C max	D	E	F	G	H
A max	026011F-270	All Others	C max	D	E	F	G	H
0.030	0.015	0.013	0.022	0.0110	0.005	0.010	0.016	0.014	inches
0,76	0,38	0,33	0,55	0,28	0,13	0,25	0,41	0,36	mm

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)					Orientation
7" (178 mm)	7" (178 mm)	A	B	C	D	E	W	P	Po	P1	T
2000	10,000*	178	100	13	14,4	8,4	8	2	4	2	0,68

* Special order

一般仕様

コア材料:

Ferrite

重量:

0.9 – 1.1 mg

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

026011F (0703) Series

Optimized Wirewound Ferrite Beads