サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0201AF (0603) Series

Wirewound Ferrite Beads

RoHS準拠 ハロゲンフリー
Our 0201AF (0603) Series wirewound ferrite beads have higher performance than others in the market, including high impedance across a wide bandwidth (up to GHz band). Ferrite construction and heavy gage wire means high current handling for their 0201 size. Extremely low DCR assures lowest insertion loss for high efficiency in mobile applications. These tiny beads eliminate noise in small power supplies and provide isolation of RF signals.
  • Higher performance than other surface-mount ferrite beads
  • High impedance across a wide bandwidth; up to GHz band
  • Ferrite construction and heavy gauge wire for high current handling
  • Extremely low DCR for high current applications – as low as 0.15 Ohms
  • Eliminates high frequency noise in power supplies or RF signal isolation applications

今すぐ購入:
個数 単価
1 $1.28
200 $0.90
500 $0.63
1000 $0.50
2000 $0.43
4000 $0.37

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C471 8 (20 of each) $45.00

仕様

Electrical specifications at 25°C.

部品番号 1 インダクタンス (nH) 2
(公差: ±10%)
インピーダンスタイプ (Ω) SRF typ (MHz) 3 DCR max (Ω) 4 Irms (mA) 5
100 MHz 900 MHz
0201AF-330XKR_ 33 19.89 159.90 3400 0.150 340
0201AF-510XKR_ 51 29.56 238.50 2900 0.300 280
0201AF-680XKR_ 68 39.89 330.50 2600 0.330 220
0201AF-910XKR_ 91 53.12 437.40 2350 0.370 200
0201AF-111XKR_ 110 64.71 548.80 2100 0.480 170
0201AF-141XKR_ 140 81.77 706.30 2000 0.650 160
0201AF-171XKR_ 170 101.90 910.90 1850 0.860 140
0201AF-201XKR_ 200 118.60 1089.00 1700 1.250 110
メモ
  1. When ordering, please specify packaging code: e.g. 0201AF-201XKRW
  2. Inductance measured at 7.9 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer.
  3. SRF is measured on an Agilent 8753D network analyser (or equivalent) with a Coilcraft SMD-D test fixture.
  4. DCR measured at 25°C on a Cambridge Technology micro-ohmmeter (or equivalent) and a Coilcraft CCF858 test fixture, For other operating temperatures, use this DCR at Temperature calculator.
  5. Irms: Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

終端処理:

  • RoHS compliant matte tin over nickel over silver-platinumglass frit.

パッケージ:

  • W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from U to W.
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
–40°C to +85°C with Irms current
保管温度範囲:
Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
最大部品温度:
+100°C (ambient + temp rise)
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Inductance vs. Frequency

Impedance vs. Frequency

物理的特徴

0201afd.gif
 
A max B max C max D E F G
0.023 0.014 0.018 0.004 0.009 0.007 0.018 inches
0,58 0,36 0,46 0,10 0,23 0,18 0,46 mm

テープ&リール仕様

tapereel_pa.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 178 100 13 14,4 8,4 8 2 4 2 NA 0,68

 

一般仕様

コア材料:
Ferrite
重量:
0.12 – 0.20 mg

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ