View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

0805USBF Series

Low Profile Common Mode Chokes

Our 0805USBF Series common mode chokes are great for noise suppression in ultra-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). They are also suitable for USB-type C specification 1.0 and provide up to 6.0 GHz differential mode 3 dB cutoff frequency and up to 30 dB common mode noise attenuation in the GHz range.

For noise suppression in ultra high speed signal lines: USB 3.x, HDMI 2.0, HDBaseT™,
DisplayPort, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
Up to 6.0 GHz differential mode 3 dB cutoff frequency
Up to 30 dB common mode noise attenuation in GHz range
Suitable for USB-type C specification 1.0
AEC-Q200 Grade 1 (−40°C to +125°C)

Refer to Designing Common Mode Filters for design guidance.

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$0.73
200	$0.61
500	$0.44
1000	$0.35
2000	$0.29
4000	$0.27

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

M = 20%

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C470	39 (10 of each)	$110.00

仕様

Electrical specifications at 25°C.

部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	遮断周波数 (GHz) 2	コモンモード減衰タイプ (dB)			最小インダクタンス (nH) 3	Irms (mA) 4	DCR max (Ω) 5	絶縁電圧 (Vrms) 6
部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	遮断周波数 (GHz) 2	10 MHz	100 MHz	500 MHz	最小インダクタンス (nH) 3	Irms (mA) 4	DCR max (Ω) 5	絶縁電圧 (Vrms) 6
0805USBF-421MR_	2	0.14 @ 3.0 GHz	6.6	0.5	4.6	6.9	28	500	0.11	250
0805USBF-901MR_	2	0.30 @ 3.0 GHz	5.8	2.1	9.1	11.8	60	500	0.14	250
0805USBF-172MR_	2	0.52 @ 2.5 GHz	3.3	4	12.8	15.7	101	500	0.22	250
0805USBF-262MR_	2	0.69 @ 2.0 GHz	2.4	5.7	15.4	18.5	165	500	0.24	250
0805USBF-372MR_	2	0.93 @ 1.8 GHz	1.4	5.8	18.1	22.3	241	500	0.27	250
0805USBF-502MR_	2	1.22 @ 1.5 GHz	0.93	11.2	21.6	25.2	315	500	0.32	250
0805USBF-672MR_	2	1.65 @ 1.2 GHz	0.69	11.3	23.3	27.7	434	450	0.37	250
0805USBF-902MR_	2	1.91 @ 1.0 GHz	0.73	12.6	25.4	30	560	350	0.63	250

メモ

When ordering, please specify packaging code: e.g. 0805USBF-902MRC
Frequency at which the differential mode attenuation equals 3 dB
Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
Irms: Current per winding that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
250 Vrms, 1 minute interwinding isolation (hipot).

終端処理:

Matte tin over nickel over silver-palladium-glass frit.

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +125°C with Irms current.

保管温度範囲:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

140°C

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

回路図

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,295	0,23

*Special order

一般仕様

コア材料:

Ferrite

重量:

14.7 – 15.5 mg

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

0805USBF Series

Low Profile Common Mode Chokes