View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

3D Model Datasheet

MSD1583 Series

Common Mode Chokes

Our MSD1583 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.

Common- and differential-mode filtering in a single device
Ideal for use in both power line and signal line applications
Up to 44 MHz differential mode cutoff frequency
500 Vrms, one minute winding-to-winding isolation

Refer to Designing Common Mode Filters for design guidance.

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$3.95
300	$2.59
600	$1.56
1200	$1.21
2400	$1.04
4800	$0.96

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

M = 20%

Termination

E = Matte tin over nickel

Packaging

D = 13" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

仕様

Electrical specifications at 25°C.

部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	遮断周波数 (MHz) 2	最小インダクタンス (µH) 3	Irms (A) 4	DCR max (Ω) 5	絶縁電圧 (Vrms) 6
部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	遮断周波数 (MHz) 2	最小インダクタンス (µH) 3	Irms (A) 4	DCR max (Ω) 5	絶縁電圧 (Vrms) 6
MSD1583-103ME_	2	10.86 @ 17.0 MHz	38.0	8.0	3.68	0.031	500
MSD1583-123ME_	2	12.11 @ 16.0 MHz	30.0	9.6	3.54	0.037	500
MSD1583-153ME_	2	12.31 @ 14.0 MHz	25.0	12	3.18	0.045	500
MSD1583-183ME_	2	15.77 @ 13.0 MHz	25.0	14	3.04	0.048	500
MSD1583-223ME_	2	14.47 @ 12.0 MHz	28.0	18	2.44	0.065	500
MSD1583-333ME_	2	33.82 @ 9.0 MHz	28.0	26	2.16	0.095	500
MSD1583-473ME_	2	39.79 @ 7.6 MHz	23.0	38	1.98	0.115	500
MSD1583-683ME_	2	49.24 @ 5.9 MHz	17.0	54	1.56	0.165	500
MSD1583-104KE_	2	69.83 @ 5.0 MHz	16.0	90	1.24	0.260	500
MSD1583-154KE_	2	73.09 @ 3.9 MHz	12.0	135	1.06	0.380	500
MSD1583-224KE_	2	78.91 @ 3.3 MHz	9.7	198	0.92	0.460	500
MSD1583-474KE_	2	104.90 @ 2.2 MHz	7.4	423	0.65	1.040	500
MSD1583-105KE_	2	129.00 @ 1.5 MHz	5.8	900	0.42	2.400	500

メモ

When ordering, please specify termination and packaging codes: e.g. MSD1583-105KEC
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

終端処理:

E = RoHS compliant matte tin over nickel over phos bronze.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +85°C with Irms current

保管温度範囲:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+125°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

回路図

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
300	330	100	13	38,4	32,4	32	24	4	2	8,6	0,5

一般仕様

コア材料:

Ferrite

重量:

3.7 – 4.4 g

Winding to Winding Isolation:

500 Vrms, one minute

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

MSD1583 Series

Common Mode Chokes