View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

1812CAN Series

Common Mode Choke

Our 1812CAN Series filters a broad frequency range of common mode noise with 50% lower DCR and higher current handling than other CANbus chokes in the market. They are designed for common mode noise suppression on CAN or CAN FD lines in automotive or general industrial automation applications, and can also be used for FlexRay automotive bus systems.

Inductance values from 11 µH to 100 µH
Filters a broad frequency range of common mode noise
50% lower DCR and higher current handling than other CANbus chokes in the market
Designed for common mode noise suppression on CAN or CAN FD
in automotive or general industrial automation applications
Can be used for FlexRay automotive bus system
Low profile 1812 footprint: 4.95 × 3.18 × 3.0 mm
AEC-Q200 Grade 1 (−40°C to +125°C)

Need parts for space, military or other critical applications?
See Coilcraft ST450FRC Series

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$1.48
100	$1.35
250	$1.22
500	$1.10
1000	$0.97
2500	$0.84
5000	$0.71

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Tolerance

N = 30%

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

B = Less than full reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

仕様

Electrical specifications at 25°C.

部品番号 1	ライン	インダクタンス (µH) 2 (公差: ±30%)	Irms (mA) 3	DCR max (Ω) 4	絶縁電圧 (Vrms) 5
部品番号 1	ライン	インダクタンス (µH) 2 (公差: ±30%)	Irms (mA) 3	DCR max (Ω) 4	絶縁電圧 (Vrms) 5
1812CAN-113NR_	2	11	460	0.27	250
1812CAN-223NR_	2	22	400	0.4	250
1812CAN-513NR_	2	51	300	0.59	250
1812CAN-104NR_	2	100	260	1.0	250

メモ

When ordering, please specify packaging code: e.g. 1812CAN-104NRC
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter and a Coilcraft CCF 1113 fixture.
Equal current when applied to each winding simultaneously that causes a 25°C temperature rise from 125°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding, measured 25°C on a Keithley 580 micro-ohmmeter and a Coilcraft CCF 858 fixture. For other operating temperatures, use this DCR at Temperature calculator.
Winding to winding isolation (hipot) tested for one minute.

終端処理:

RoHS compliant matte tin over nickel over silverpalladium-glass frit.

パッケージ:

C = 7" machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13" machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2200 parts per full reel).

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +125°C with Irms current

保管温度範囲:

Component: –40°C to +150°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+150°C

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

回路図

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,05	0,3

* Special order

一般仕様

コア材料:

Ferrite

重量:

120 – 130 mg

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

1812CAN Series

Common Mode Choke