3D Model Datasheet

NA6223-AL

Name: NA6223-ALD
Brand: Coilcraft
SKU: NA6223-ALD
Price: 2.46 USD
Availability: InStock

NA6223-ALD

For more information and specification about the part.

Go to series

Buy Now:

Count	Unit price
1	$3.30
175	$2.84
700	$2.46
1400	$1.91
2800	$1.65
5000	$1.51

For high volume or non-stock items, request a quote.

Packaging

D = 13" machine-ready reel

. in stock, ready to ship today.

Request a Sample:

Typical Application

Works with Texas Instruments TPS23753

Input Voltage	Output 1		Power	Fsw
Input Voltage	Sec	Bias	Power	Fsw
36 V — 57 V	5 V , 2 A	10 V , 0.02 A	10 W	100 kHz

Specifications

Electrical specifications at 25°C.

Part number 2 (Hover for schematics)	Inductance at 0A (µH) 3 (Tolerance: ±10%)	Inductance min at 1.1 A (µH) 4	DCR max (Ω) 5				Leakage Inductance max (µH) 6	Turns Ratio 7	Isolation Voltage (Vrms) 8	Schematic
Part number 2 (Hover for schematics)	Inductance at 0A (µH) 3 (Tolerance: ±10%)	Inductance min at 1.1 A (µH) 4	Pri	Sec	Sync	Bias	Leakage Inductance max (µH) 6	Pri : Sec : Sync : Bias	Isolation Voltage (Vrms) 8	Schematic
NA6223-AL_	180	162	0.330	0.014	0.190	1.230	1.2	1 : 0.167 : 0.167 : 0.361	1500	na6223s

Notes

Output for the secondary is between pins 7 and 10. Bias winding output is 10 V, 20 mA. Sync winding output is a 5 V Sync FET gate drive signal.
When ordering, please specify packaging code: e.g. NA6223-ALD
Inductance is for the primary, measured at 100 kHz, 0.1 Vrms, 0 Adc.
Ipk is the peak primary current drawn at minimum input voltage.
DCR for the primary is from pin 1 to pin 2, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Leakage inductance if for the primary and is measured with all other windings shorted.
Turns ratio is with the primary windings connected in series.
1500 Vrms, one minute isolation from the primary and bias windings to the secondary.

Termination:

RoHS-compliant 260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations.

Packaging:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

Environmental

Environmental:

RoHS compliant

Ambient temperature range:

–40°C to +85°C

Storage temperature range:

Component: −40°C to +85°C
Tape and reel packaging: −40°C to +80°C

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Schematics

Physical characteristics

Tape and Reel specification

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
175	330	100	13	38,4	32,4	32	28	4	2	12,93	0,6

General specification

Core Material:

Ferrite

Weight:

6.2 g

Packaging:

175 per 13″ reel Plastic tape: 32 mm wide, 0.6 mm thick, 28 mm pocket spacing, 12.93 mm pocket depth

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Refer to Soldering Coilcraft Components before soldering.

PCB Washing:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Warehouses

Language settings

Currency settings

NA6223-AL

NA6223-ALD

Share this part

Selected configuration not available

Typical Application

Specifications

Termination:

Packaging:

Schematics

Physical characteristics

Tape and Reel specification

General specification

Soldering/Washing

Warning