3D Model Datasheet Spice Model SPICE DCDC Tool

LPO3010 Series

Low Profile Surface Mount Power Inductors

Coilcraft LPO3010 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.

Low profile for compact packaging
High saturation current ratings
Ceramic case for thermal stability
Ferrite core for flat L vs I curve

Buy Now:

Part number

Find my part

Count	Unit price
1	$1.43
250	$1.18
500	$0.91
1000	$0.76
2500	$0.63
5000	$0.58

For high volume or non-stock items, request a quote.

Tolerance

N = 30%

Termination

L = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

. in stock, ready to ship today.

Request a Sample:

Part number

Find my part

Designer's Kit:

Kit	Values	Price
C388	13 (3 of each)	$40.00

Specifications

Electrical specifications at 25°C.

Part number 1	Inductance (µH) 2	Tolerance (%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
Part number 1	Inductance (µH) 2	Tolerance (%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
LPO3010-102NL_	1.0	30	0.14	200	1.7	1.4
LPO3010-122NL_	1.2	30	0.16	190	1.6	1.4
LPO3010-152NL_	1.5	30	0.20	150	1.3	1.0
LPO3010-222NL_	2.2	30	0.27	140	1.2	0.90
LPO3010-332NL_	3.3	30	0.34	100	0.96	0.60
LPO3010-472NL_	4.7	30	0.57	80.0	0.76	0.50
LPO3010-682NL_	6.8	30	0.65	68.0	0.68	0.47
LPO3010-822NL_	8.2	30	1.0	60.0	0.64	0.45
LPO3010-103ML_	10	20	1.2	50.0	0.50	0.45
LPO3010-153ML_	15	20	1.6	35.0	0.42	0.40
LPO3010-223ML_	22	20	2.2	30.0	0.37	0.35
LPO3010-333ML_	33	20	2.8	14.0	0.31	0.29
LPO3010-473ML_	47	20	4.6	12.0	0.30	0.28

Notes

When ordering, please specify termination and packaging codes: e.g. LPO3010-473MLC
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753ES or equivalent.
Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

Termination:

L = Silver-palladium-platinum-glass frit terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Packaging:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel).

Environmental

Environmental:

RoHS compliant

Ambient temperature range:

–40°C to +85°C with Irms current

Storage temperature range:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

Maximum part temperature:

+125°C (ambient + temp rise)

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Performance curves

Inductance vs. Current

Inductance vs. Frequency

Physical characteristics

Tape and Reel specification

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1000	3500*	178/330	60/100	13	18,4	12,4	12	8	4	2	1,14	0,25

* Special order

General specification

Core Material:

Ferrite

Weight:

20 - 22 mg

Packaging:

1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.14 mm pocket depth

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Refer to Soldering Coilcraft Components before soldering.

Recommended Pick & Place Nozzle:

OD: 3 mm; ID: ≤1.5 mm

PCB Washing:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPO3010 Series

Low Profile Surface Mount Power Inductors