SLC7530 Series

Shielded Power Inductors

Coilcraft’s SLC7530 Series of high-current shielded power inductors feature sub-milliohm DC resistance and very high current handling. Magnetic shielding and tight DCR tolerances make them ideal for low voltage multi-phase VRM/VRD/EVRD regulators and current sensing circuits.

Sub-milliohm DC resistance and tight DCR tolerance
Ferrite construction for flat L vs I with high current
Magnetic shielding allows high-density packaging
Ideal for multi-phase VRM/VRD/EVRD regulators
AEC-Q200 Grade 3 (−40°C to +85°C)

Buy Now:

Part number

Find my part

Count	Unit price
1	$0.95
250	$0.85
500	$0.72
1000	$0.59
2500	$0.52
5000	$0.45

For high volume or non-stock items, request a quote.

Tolerance

M = 20%

Termination

L = Matte tin over nickel

Packaging

C = 7" machine-ready reel

. in stock, ready to ship today.

Request a Sample:

Part number

Find my part

Designer's Kit:

Kit	Values	Price
C379	8 (3 of each)	$40.00
C467	40 (3 of each)	$110.00

Specifications

Electrical specifications at 25°C.

Single Conductor

Part number 1	Inductance (µH) 2 (Tolerance: ±20%)	DCR ± 5% (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6
Part number 1	Inductance (µH) 2 (Tolerance: ±20%)	DCR ± 5% (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6
SLC7530S-500ML_	0.050	0.123	3.8	50.0	40.0
SLC7530S-640ML_	0.064	0.123	3.7	32.0	40.0
SLC7530S-820ML_	0.082	0.123	3.8	22.0	40.0
SLC7530S-101ML_	0.10	0.123	3.8	20.0	40.0

Dual Conductor

Part number 1	Leads connected in parallel					Leads connected in series
	L (µH) 2 (±20%)	DCR ± 5% (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6	L (µH) 2 (±20%)	DCR max (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6
	L (µH) 2 (±20%)	DCR ± 5% (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6	L (µH) 2 (±20%)	DCR max (mΩ) 3	SRF typ (GHz) 4	Isat (A) 5	Irms (A) 6
SLC7530D-500ML_	0.050	0.209	3.8	50.0	38.0	0.19	1.000	1.5	21.0	28.0
SLC7530D-640ML_	0.064	0.209	3.7	32.0	38.0	0.27	1.000	1.3	14.0	28.0
SLC7530D-820ML_	0.082	0.209	3.8	22.0	38.0	0.35	1.000	1.2	11.0	28.0
SLC7530D-101ML_	0.10	0.209	3.8	20.0	38.0	0.40	1.000	0.95	8.0	28.0

Notes

When ordering, please specify termination and packaging codes: e.g. SLC7530S-101MLD
Inductance measured at 100 kHz, 0.1 Vrms, using an Agilent/HP 4263B LCR meter or equivalent.
DCR measured at 25°C on a micro-ohmmeter at the points indicated in the diagram. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753ES network analyzer and a Coilcraft SMD-D fixture.
Isat: DC current at 25°C that causes a 20% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

Termination:

L = RoHS compliant matte tin over nickel over copper.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Packaging:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1700 parts per full reel).

Environmental

Environmental:

RoHS compliant

Ambient temperature range:

–40°C to +85°C with (40°C rise) Irms current

Storage temperature range:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

Maximum part temperature:

+125°C (ambient + temp rise)

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Performance curves

Temperature Rise versus Current

Inductance vs Current

Dual Conductor

Inductance vs Frequency

Dual Conductor

Inductance vs Current

Single Conductor

Inductance vs Frequency

Single Conductor

Physical characteristics

Single conductor Dual conductor

Tape and Reel specification

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	1700*	178/330	60/100	13	22,4	16,4	16	12	4	2	3,12	0,33

* Special order

General specification

Core Material:

Ferrite

Weight:

0.44 – 0.47 g

Packaging:

500/7″ reel; 1700/13″ reel; Plastic tape: 16 mm wide, 0.33 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Refer to Soldering Coilcraft Components before soldering.

PCB Washing:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

SLC7530 Series

Shielded Power Inductors