View:
Introduction
Specifications
Environmental
Performance curves
Schematics
Physical characteristics
Tape & Reel
Soldering/Washing

3D Model Datasheet S-Param

PFD2015-182

Name: PFD2015-182MRC
Brand: Coilcraft
SKU: PFD2015-182MRC
Price: 0.34 USD
Availability: InStock

PFD2015-182MEC, PFD2015-182MRC

For more information and specification about the part.

Go to series

Buy Now:

Count	Unit price
1	$0.94
100	$0.76
250	$0.59
500	$0.41
1000	$0.34
2000	$0.29
5000	$0.27

For high volume or non-stock items, request a quote.

Tolerance

M = 20%

Termination

R = Matte tin over nickel over silver-platinum-glass frit (Special order, added cost)

E = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

B = Less than full reel

. in stock, ready to ship today.

Request a Sample:

Specifications

Electrical specifications at 25°C.

Part number 1	Lines	Common mode peak impedance (kΩ)	Cutoff frequency (MHz) 2	Inductance min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolation Voltage (Vrms) 6
Part number 1	Lines	Common mode peak impedance (kΩ)	Cutoff frequency (MHz) 2	Inductance min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolation Voltage (Vrms) 6
PFD2015-182ME_	2	4.21 @ 510 MHz	350	1.44	0.490	0.294	250

Notes

When ordering, please specify packaging code: e.g. PFD2015-103MEC
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

Termination:

E = RoHS compliant silver-palladium-platinum-glass frit.
R = RoHS compliant matte tin over nickel over silver-platinum-glass frit. (Special order, added cost)

Packaging:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).

Environmental

Environmental:

RoHS compliant , halogen free

Ambient temperature range:

–40°C to +125°C

Storage temperature range:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

Maximum part temperature:

+125°C (Ambient + temperature rise)

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Performance curves

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Schematics

Physical characteristics

Tape and Reel specification

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	8	4	2	1,63	0,23

* Special order

General specification

Core Material:

Ferrite

Weight:

13 – 23 mg

Winding to Winding Isolation:

250 Vrms, one minute

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Refer to Soldering Coilcraft Components before soldering.

PCB Washing:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

PFD2015-182

PFD2015-182MEC, PFD2015-182MRC