View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

3D Model Datasheet

CST2010 Series SMT

Current Sense Transformers

Sensed current up to 47 Amps
Designed for use up to 1 MHz and above
Very low primary DC resistance
AEC-Q200 Grade 1 (−40°C to +125°C)

Need parts for space, military or other critical applications?
See Coilcraft ST629TCB Series

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$2,01
300	$1,71
600	$1,51
1200	$1,30
2400	$1,11
4800	$1,02

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Packaging

D = 13" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 (Hover for schematics)	Induktivität bei 0A (mH) 2 (Toleranz: ±30%)	DCR max (Ω) 3		Windungsverhältnis	Volt-Zeit- Produkt (V-µs) 4	Frequenz (kHz) 5	Strom (A) 6	Abschluss- widerstand R_T (Ω) 7	Isolations- spannung (Vrms) 8
Teilenummer 1 (Hover for schematics)	Induktivität bei 0A (mH) 2 (Toleranz: ±30%)	Pri	Sec	Pri : Sec	Volt-Zeit- Produkt (V-µs) 4	Frequenz (kHz) 5	Strom (A) 6	Abschluss- widerstand R_T (Ω) 7	Isolations- spannung (Vrms) 8
CST2010-020L_	0,34	0,00036	0,18	1 : 20	50,8	10 — >1000	47	0,50	1500
CST2010-030L_	0,76	0,00036	0,265	1 : 30	76,2	7 — >1000	47	0,80	1500
CST2010-040L_	1,36	0,00036	0,56	1 : 40	101,6	5 — >1000	47	1,0	1500
CST2010-050L_	2,12	0,00036	0,705	1 : 50	127	4 — >1000	47	1,3	1500
CST2010-060L_	3,06	0,00036	0,85	1 : 60	152,4	3 — >1000	47	1,5	1500
CST2010-070L_	4,16	0,00036	1	1 : 70	177,8	3 — >1000	47	1,8	1500
CST2010-080L_	5,44	0,00036	1,15	1 : 80	203,2	2 — >1000	47	2,0	1500
CST2010-100L_	8,50	0,00036	1,45	1 : 100	254	2 — >1000	47	2,5	1500
CST2010-125L_	13,30	0,00036	1,85	1 : 125	317,5	2 — >1000	47	3,1	1500
CST2010-150L_	19,20	0,00036	2,25	1 : 150	381	1 — >1000	47	3,8	1500
CST2010-200L_	34,00	0,00036	4,06	1 : 200	508	1 — >1000	47	5,0	1500

Hinweise

When ordering, please specify packaging code: e.g.CST2010-200LD
Inductance measured between secondary pins at 1 kHz, 0.1 Vrms, 0 Adc.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Volt-time product is for the secondary, between pin 2 and 4.
For specific questions regarding frequency range, please contact us at [email protected].
Primary current of 47 A causes approximately 40°C temperature rise from 25°C ambient. Higher current causes a greater temperature rise (see Temperature Rise vs Current curve).
Terminating resistance (R_T) value is based on 1 Volt output with 40 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
R_T= V_out × N_sec / I_in.
1500 Vrms, one minute isolation (hipot) winding to winding.

Anschlüsse:

RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze (pins 1-10); Matte tin over nickel over copper (pins 11-12).

Verpackung:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +125°C

Lagertemperaturbereich:

Component: –40°C to +165°C.
Tape and reel Packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+165°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Temperature vs Current

Pläne/Diagramme

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
300	330	100	13	38,4	32,4	32	20	4	2	10,6	0.50

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

4.13 g

Verpackung:

300/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 10.6 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

CST2010 Series SMT

Current Sense Transformers