View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

Datasheet 3D-Modelle

CST2-100L

Name: CST2-100LC
Brand: Coilcraft
SKU: CST2-100LC
Price: 1.14 USD
Availability: InStock

CST2-100LC

Für weitere Informationen und Spezifikationen zum Bauteil.

Gehe zu Baureihe

Jetzt kaufen:

Anzahl	Einzelpreis
1	$1,92
250	$1,64
500	$1,39
1000	$1,14
2500	$0,99
5000	$0,92

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Designer-Kits:

Kit	Werte	Preis
C389	16 (2 of each)	$50,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 (Hover for schematics)	Induktivität min (µH) 2	DCR max (Ω) 3		Windungsverhältnis	Volt-Zeit- Produkt (V-µs) 4	Frequenz (kHz) 5	Strom (A) 6	Abschluss- widerstand R_T (Ω) 7	Isolations- spannung (Vrms) 8	Farbpunkt
Teilenummer 1 (Hover for schematics)	Induktivität min (µH) 2	Pri	Sec	Pri : Sec	Volt-Zeit- Produkt (V-µs) 4	Frequenz (kHz) 5	Strom (A) 6	Abschluss- widerstand R_T (Ω) 7	Isolations- spannung (Vrms) 8	Farbpunkt
CST2-100L_	2000	0,0007	5,5	1 : 100	54	9 — >1000	20,0	5,0	500	Gray

Hinweise

When ordering, please specify termination and packaging codes: e.g. CST1-125LC or CST2-125LC
Inductance measured across secondary at 100 kHz, 0.1 Vrms.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Volt-time product is for the secondary, between pin 6 and 4 for CST1 and between pin 1 and 3 for CST2.
For specific questions regarding frequency range, please contact us at [email protected].
Primary current of 20 A causes approximately 40°C temperature rise from 25°C ambient. Higher current causes a greater temperature rise. (see Temperature Rise vs Current curve).
Terminating resistor value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
R_T (Ohms) = V_out × N_sec / I_in.
500 Vrms, one minute isolation (hipot) winding to winding.

Anschlüsse:

L = RoHS compliant tin-silver over tin over nickel over phos bronze (pins 1 – 6); RoHS compliant Matte tin over nickel over copper (pins 7 – 8).
S = non-RoHS tin-lead (63/37) over tin over nickel over phos bronze (pins 1 – 6); non-RoHS tin-lead over gold over nickel over copper (pins 7 – 8). (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

−40°C to +125°C

Lagertemperaturbereich:

Component: −40°C to +165°C
Tape and reel packaging: −40°C to +80°C

Maximale Bauteiltemperatur:

+165°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Temperature vs. Current

Pläne/Diagramme

CST1 Series

Terminating resistor (R_T)value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: R_T (Ohms) = V_out × N_sec / I_in.

CST2 Series

Terminating resistor (R_T) value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: R_T (Ohms) = V_out × N_sec / I_in.

Physikalische Eigenschaften

Pinouts

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	1000*	178/330	60/100	13	22,4	16,4	16	12	4	2	5,6	0,35

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

0.4 g

Verpackung:

250/7″reel;1000/13″ reel; Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 5.6 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Lager

Spracheinstellungen

Währungseinstellungen

CST2-100L

CST2-100LC

Andere über dieses Bauteil informieren

Gewählte Konfiguration nicht verfügbar

Technische Daten

Anschlüsse:

Verpackung:

Kennlinien

Temperature vs. Current

Pläne/Diagramme

Physikalische Eigenschaften

Pinouts

Gurt/Rolle-Spezifikationen

Allgemeine Spezifikation

Löten/Reinigen

Verwandte Produkte

CST1-020L

CST1-030L

CST1-040L

CST1-050L

CST1-060L

CST1-070L

CST1-100L

CST1-125L

CST2-020L

CST2-030L

CST2-040L

CST2-050L

CST2-060L

CST2-070L

CST2-125L

Verwandte Produktreihen

CS2106 50/60 Hz Current Sense Transformer

High Frequency Current Sense Transformers

CS60 Series

CS60-010

CST1211 Series

CST2010V Series

CST3015 Series

CST2010 Series SMT

CST2020 Series

CST4835 Series

CST7030 Series

CU8965-AL

D18XX, CS1XXX Series

SCS Series

Warnung