3D Model Datasheet SPICE-Modell SPICE

1210POCB Series

PoC (Power over Coax) Injection Chokes

Small size to reduce board area of overall system solutions, with a low profile of only 2.0 mm
High impedance (≥ 1kOhm) maintained over a wide band frequency range to isolate AC signal from the DC power
AEC-Q200 qualified

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$1,36
100	$1,19
250	$0,90
750	$0,55
1500	$0,43
3000	$0,37
6000	$0,34

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

M = 20%

Termination

R = Matte tin over nickel over silver- platinum-glass frit.

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	DCR (Ω) 3		SRF typ (MHz) 4	Isat (mA) 5					Irms typ (mA)
Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	typ	max	SRF typ (MHz) 4	25°C	85°C	105°C	125°C	140°C	at 25°C 6	at 85°C 7	at 125°C 8
1210POCB-222MR_	2,2	0,080	0,10	300	1600	1300	1200	1100	1000	2000	1800	800
1210POCB-682MR_	6,8	0,17	0,21	120	840	720	690	620	610	1300	1200	700
1210POCB-103MR_	10	0,22	0,27	90	720	630	570	520	460	1200	1100	630
1210POCB-153MR_	15	0,36	0,44	80	610	520	480	440	410	960	870	500
1210POCB-223MR_	22	0,70	0,86	70	520	450	430	410	390	660	600	330

Hinweise

When ordering, please specify packaging code: e.g. 1210POCB-223MRC
Inductance tested at 100 kHz, 0.1 Vrms, 200 mA DC using HP4263 w/SMD-B test fixture or equivalent.
DCR measured at 25°C using a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 5071C network analyzer and a Coilcraft SMD-D test fixture.
Isat: DC current that causes 30% inductance drop from its initial value at 200 mA at specified temperature.
Temperature derating curves.
Irms: Current that causes a 40°C rise at 25°C. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms: Current that causes a 40°C rise at 85°C. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms: Current that causes a 15°C rise at 125°C. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

Anschlüsse:

RoHS compliant matte tin over nickel over silver platinum-glass frit.

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3000 parts per full reel). Factory order only, not stocked.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +125°C with Irms current

Lagertemperaturbereich:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+140°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

L vs Current

Impedance vs Frequency

Physikalische Eigenschaften

A max	B max	C max	D	E	F	G	H	I	J
0.13	0.105	0.079	0.004	0.037	0.020	0.080	0.104	0.026	0.100	inches
3,30	2,67	2,00	0,10	0,94	0,51	2,03	2,65	0,65	2,54	mm

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	3000*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,03	0,23

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

115 – 125 mg

Verpackung:

750/7″ reel; 3000/13″ reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 2.03 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

1210POCB Series

PoC (Power over Coax) Injection Chokes