3D Model Datasheet SPICE-Modell SPICE DCDC Tool

LPO3310 Series

Low Profile Surface Mount Power Inductors

Coilcraft LPO3310 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.

Low profile for compact packaging
High saturation current ratings
Ceramic case for thermal stability
Ferrite core for flat L vs I curve

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$1,39
250	$1,13
500	$0,85
1000	$0,70
5000	$0,59

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

M = 20%

Termination

L = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
C375	15 (3 of each)	$45,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
LPO3310-301ML_	0,30	0,040	420	2,8	2,8
LPO3310-471ML_	0,47	0,042	310	2,3	2,3
LPO3310-701ML_	0,70	0,068	200	1,9	1,9
LPO3310-102ML_	1,0	0,076	180	1,6	1,6
LPO3310-152ML_	1,5	0,120	153	1,4	1,4
LPO3310-222ML_	2,2	0,150	112	1,1	1,1
LPO3310-332ML_	3,3	0,200	91,0	0,95	0,95
LPO3310-472ML_	4,7	0,280	80,0	0,80	0,80
LPO3310-682ML_	6,8	0,360	68,0	0,66	0,66
LPO3310-822ML_	8,2	0,500	58,0	0,65	0,65
LPO3310-103ML_	10	0,520	52,0	0,57	0,57
LPO3310-153ML_	15	0,700	43,0	0,45	0,45
LPO3310-223ML_	22	1,200	34,0	0,37	0,37
LPO3310-333ML_	33	1,780	27,0	0,30	0,30
LPO3310-473ML_	47	2,150	22,0	0,25	0,25

Hinweise

When ordering, please specify termination and packaging codes: e.g. LPO3310-473MLC
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753ES or equivalent.
Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

Anschlüsse:

L = Silver-palladium-platinum-glass frit terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +85°C with Irms current

Lagertemperaturbereich:

Component: –40°C to +110°C
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+110°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Inductance vs. Current

Inductance vs. Frequency

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1000	3500*	178/330	60/100	13	18,4	12,4	12	8	4	2	1,37	0,23

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

28.0 - 31.3 mg

Verpackung:

1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Empfohlene Bestückungsaufnahme:

OD: 3.3 mm; ID: < 1.65 mm

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPO3310 Series

Low Profile Surface Mount Power Inductors