DO3316H Series

High Current Surface Mount Power Inductors

Coilcraft DO3316H Series unshielded surface-mount power inductors offer proven performance at a great value. They provide high saturation current ratings, high energy storage, and low resistance.

Open magnetic flux path
High saturation current ratings
High energy storage
Industry standard footprint
AEC-Q200 Grade 3 (−40°C to +85°C)

Need parts for space, military or other critical applications?
See Coilcraft AE563PKA Series | See Coilcraft AT563PKA Series | See Coilcraft ML563PKA Series | See Coilcraft MS563PKA Series

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$1,20
750	$0,97
1500	$0,72
3000	$0,59
6000	$0,53

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

M = 20%

Termination

L = Tin-silver

Packaging

D = 13" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
C326	10 (3 of each)	$40,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (µH) 2	Toleranz (%) 3	DCR max (Ω) 4	SRF typ (MHz) 5	Isat (mA) 6	Irms (A) 7
Teilenummer 1	Induktivität (µH) 2	Toleranz (%) 3	DCR max (Ω) 4	SRF typ (MHz) 5	Isat (mA) 6	Irms (A) 7
DO3316H-121ML_	0,12	20	0,0015	200	28000	17,0
DO3316H-331ML_	0,33	20	0,0020	200	20000	16,0
DO3316H-681ML_	0,68	20	0,0050	200	13000	12,0
DO3316H-102ML_	1,0	20	0,0060	100	11000	10,0
DO3316H-152ML_	1,5	20	0,0080	90,0	9000	9,0
DO3316H-222_L_	2,2	10,20	0,011	80,0	7800	7,4
DO3316H-272_L_	2,7	10,20	0,012	65,0	7000	6,6
DO3316H-332_L_	3,3	10,20	0,014	60,0	6400	5,9
DO3316H-392_L_	3,9	10,20	0,015	50,0	5900	5,3
DO3316H-472_L_	4,7	10,20	0,018	45,0	5400	4,8

Hinweise

When ordering, please specify tolerance, termination and packaging codes: e.g. DO3316H-472MLD
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B LCR meter or equivalent.
Tolerances in bold are stocked for immediate shipment.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753D network analyzer. Details
Isat: DC current at 25°C that causes a 10% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

Toleranz:

M = 20%, K = 10% (Table above shows stock tolerances in bold.)

Anschlüsse:

L = RoHS compliant tin-silver (96.5/3.5) over copper.
T = RoHS tin-silver-copper (95.5/4/0.5) over copper. (Special order, added cost)
S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

Verpackung:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +85°C with Irms current

Lagertemperaturbereich:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

Maximale Bauteiltemperatur:

+125°C (Ambient + temperature rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Inductance vs Frequency

Inductance vs Current

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation ‡
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T	or
750	330	100	13	30,4	24,4	24	12	4	2	6,4	0,35

‡ Dot or number marking does not indicate polarity

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

0.95– 1.25 g

Verpackung:

750 per 13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 12 mm pocket spacing, 6.4 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

DO3316H Series

High Current Surface Mount Power Inductors