View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

3D Model Datasheet

GA3416-CL Series

Dual Inductor for Class-D output filters

Coilcraft's GA3416-CL Series uncoupled dual inductors provide two back-to-back inductors that operate independently without coupling effects. This unique design saves space by combining two inductors in a single package. They are perfect for Class-D applications.

Designed for low distortion and best possible sound quality
Shielded SMT package with two coils
Very low magnetic coupling
Additional mounting pads provide excellent board adhesion
AEC-Q200 Grade 1 (−40°C to +125°C)

Electroplated gold (<50 µin) over nickel over phos bronze (additional mounting pads only)

Jetzt kaufen:

Anzahl	Einzelpreis
1	$6,78
400	$6,60
800	$5,73
1200	$5,00
2400	$4,30
4800	$3,94

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Packaging

D = 13" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±10%)	DCR max (mΩ) 3	SRF typ (MHz) 4	THD+N 5	Isat (A) 6			Irms (A) 7
Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±10%)	DCR max (mΩ) 3	SRF typ (MHz) 4	THD+N 5	10% drop	20% drop	30% drop	20°C rise	40°C rise
GA3416-CL_	10	21,0	23,6	<0.2	8,6	8,7	8,8	3,0	4,3

Hinweise

When ordering, please specify termination and packaging codes: e.g. GA3416-CLD
Inductance measured at 500 kHz, 0.5 Vrms, 0 Adc using an Agilent/HP 4284A impedance analyzer.
DCR measured on a micro-ohmmeter at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using Agilent/HP 8753D network analyzer.
Total harmonic distortion + noise measured at 23 W into a 2-Ohm or 4-Ohm load at 1 kHz with a 21 Vdc supply.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
Irms: Current applied to both windings at the same time that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

Anschlüsse:

L = RoHS compliant tin-silver over copper (leads); gold over nickel over phos bronze (additional mounting pads.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

−40°C to +125°C with (40°C) Irms current

Lagertemperaturbereich:

Component: −40°C to +165°C
Tape and reel packaging: −40°C to +80°C

Maximale Bauteiltemperatur:

+165°C (Ambient + temperature rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Inductance vs. Current

Pläne/Diagramme

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
200	330	100	13	38,4	32,4	32	20	4	2	12,95	0,4

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

7.8 g

Verpackung:

200/13″ reel Plastic tape: 32 mm wide, 0.4 mm thick, 20 mm pocket spacing, 12.95 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

GA3416-CL Series

Dual Inductor for Class-D output filters