View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

3D Model Datasheet

1210uT-332

Für weitere Informationen und Spezifikationen zum Bauteil.

Gehe zu Baureihe

Jetzt kaufen:

Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	Coupling coefficient (max)	DCR max (Ω) 3	SRF typ (MHz)	Isolations- spannung (Vrms)	Isat (A) 4				Irms (A) 5
Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	Coupling coefficient (max)	DCR max (Ω) 3	SRF typ (MHz)	Isolations- spannung (Vrms)	25°C	85°C	105°C	125°C	25°C	85°C	125°C
1210uT-332MRC	3,3	0.1	0,285	70	250	1,5	1,2	0,90	0,73	0,77	0,69	0,40

Hinweise

When ordering, please specify termination and packaging codes: e.g. 1210uT-103MRC
Inductance measured per winding at 100 kHz, 0.1 V, 0 Adc.
DCR is per winding, measured on a micro-ohmeter.
Isat: DC current at the specified ambient temperature that causes a 30% inductance drop from its value without current.
Irms: Current applied to both windings at the same time causes a 40C rise from the specified 25°C and 85°C ambient temperatures, and a 15°C rise at 125°C ambient temperature. This information is for reference only and does not represent absolute maximum ratings.

Anschlüsse:

R = RoHS compliant matte tin over nickel over silver-platinum-glass frit.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel). Factory order only, not stocked.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

−40°C to +125°C with (40°C) Irms current

Lagertemperaturbereich:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

Maximale Bauteiltemperatur:

+140°C (Ambient + temperature rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Impedance vs Frequency

L vs Current vs Temperature

Pläne/Diagramme

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	3500*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,67	0,23

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

75 − 95 mg

Verpackung:

750/7″ reel; 3000/13″ reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 2.67 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

1210uT-332