XGL3020 Series

Ultra-Low Loss Shielded Power Inductors

The ultra-low profile XGL3020 Series offers the lowest DC losses and extremely low AC losses for a wide range of DC-DC converters. This exceptional characteristic makes them an optimal choice for a variety of applications where space is limited and efficient power management is critical, including different non-isolated converter topologies, point-of-load (POL), IoT devices, and many other applications.

With an industry-leading 80 V voltage rating, these components are suitable for wide V_in DC-DC converters and applications. Additionally, their AEC qualification ensures reliability and robustness in automotive and other harsh environments.

Industry’s lowest DCR and ultra low AC losses
AEC-Q200 qualified
Superior current handling with soft saturation characteristics
Wide inductance range from 0.10 to 4.5 µH

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C. Operating voltage 0 — 80 V

Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
XGL3020-101MEC	0,10	2,0	2,4	380	7,3	11,0	14,8	21,2	28,0
XGL3020-181MEC	0,18	3,0	3,6	230	5,6	8,3	11,0	16,5	21,8
XGL3020-281MEC	0,28	3,9	4,7	185	4,4	6,8	9,0	15,3	20,3
XGL3020-301MEC	0,30	4,6	5,6	180	3,9	6,0	7,9	14,2	18,6
XGL3020-401MEC	0,40	5,7	6,9	150	3,5	5,4	7,2	12,6	16,7
XGL3020-561MEC	0,56	7,7	9,3	120	3,0	4,5	6,2	10,6	14,0
XGL3020-681MEC	0,68	9,4	11,2	110	2,7	4,1	5,7	9,7	12,8
XGL3020-851MEC	0,85	11,9	14,2	88	2,3	3,6	4,8	7,8	10,3
XGL3020-102MEC	1,0	14,3	17,1	85	2,2	3,3	4,3	7,4	9,7
XGL3020-152MEC	1,5	22,1	26,5	68	1,8	2,7	3,6	6,0	7,8
XGL3020-222MEC	2,2	30,5	36,5	55	1,5	2,2	2,9	5,0	7,1
XGL3020-332MEC	3,3	47,7	57,2	42	1,2	1,8	2,4	3,7	4,8
XGL3020-452MEC	4,5	69,8	83,2	35	1,0	1,5	1,9	3,3	4,4

Hinweise

When ordering, please specify termination and packaging codes: e.g. XGL3020-452MEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

Anschlüsse:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

C = 7" machine-ready reel
EIA-481 embossed plastic tape (1000 parts per full reel).
Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13" machine-ready reel
EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +125°C with (40°C rise) Irms current

Lagertemperaturbereich:

Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C

Maximale Bauteiltemperatur:

+165°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations