3D Model Datasheet SPICE-Modell SPICE DCDC Tool

SLR1065 Series

High Current Shielded Power Inductors

Coilcraft’s SLR1065 Series of high-current shielded power inductors feature sub-milliohm DC resistance and very high current handling. Magnetic shielding and tight DCR tolerances make them ideal for low voltage multi-phase VRM/VRD/EVRD regulators and current sensing circuits.

Tight DCR tolerance for inductor-DCR-based current sensing circuits
Three versions for optimal efficiency and accuracy
Ferrite construction for flat L vs I with high current
Magnetic shielding allows high-density packaging
Ideal for multi-phase VRM/VRD/EVRD regulators

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$1,05
150	$0,84
300	$0,68
1200	$0,53
2400	$0,47
5000	$0,43

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

K = 10%

Termination

E = Matte tin over nickel

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
C467	40 (3 of each)	$110,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (nH) 2 (Toleranz: ±10%)	DCR ± 8% (mΩ) 3	SRF typ (MHz)	Isat (A) 4			Irms (A) 5
Teilenummer 1	Induktivität (nH) 2 (Toleranz: ±10%)	DCR ± 8% (mΩ) 3	SRF typ (MHz)	at 25°C	at 100°C	at 125°C	20°C rise	40°C rise
SLR1065-121KE_	120	0,48	95,0	86,0	74,0	68,0	38,5	49,0
SLR1065-141KE_	140	0,48	75,0	75,0	63,0	58,0	38,5	49,0
SLR1065-171KE_	170	0,48	65,0	64,0	52,0	49,0	38,5	49,0
SLR1065-221KE_	215	0,48	50,0	51,0	41,0	38,0	38,5	49,0
SLR1065-301KE_	300	0,48	40,0	32,0	27,0	25,0	38,5	49,0

Hinweise

When ordering, please specify packaging code: e.g. SLR1065-301KEC
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284.
DCR measured at 25°C on a micro-ohmmeter at the points indicated in this diagram. For other operating temperatures, use this DCR at Temperature calculator.
Isat: DC current that causes a 20% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

Anschlüsse:

RoHS compliant matte tin over nickel over copper.

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (800 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +85°C with (40°C rise) Irms

Lagertemperaturbereich:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+125°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Inductance vs. Frequency

Inductance vs. Current

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
150	800*	330	100	13	30,4	24,4	24	12	4	2	7,05	0,5

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

2.2 – 2.4 g

Verpackung:

150/7″ reel; 800/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 12 mm pocket spacing, 7.05 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

SLR1065 Series

High Current Shielded Power Inductors