Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

PFD2015 Series

Miniature Common Mode Chokes

RoHS-konform Halogenfrei
Our PFD2015 Series miniature common mode chokes provide both common mode and differential mode filtering in a single device that measures just 2.29 x 1.52 x 1.5 mm. They are ideal for use in both power line and signal line applications, providing 250 Vrms, one minute winding-to-winding isolation.
  • Common mode and differential mode filtering in a single device 
  • Compact package measures just 2.29 x 1.52 x 1.5 mm
  • Ideal for use in both power line and signal line applications
  • Up to 550 MHz differential mode cutoff frequency
  • 250 Vrms, one minute interwinding isolation
Refer to Designing Common Mode Filters for design guidance.

Jetzt kaufen:
Anzahl Einzelpreis
1 $0,94
100 $0,76
250 $0,59
500 $0,41
1000 $0,34
2000 $0,29
5000 $0,27

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
PFD2015-102ME_ 2 2,30 @ 400 MHz 550 0,80 0,800 0,165 250
PFD2015-122ME_ 2 3,45 @ 350 MHz 560 0,96 0,750 0,175 250
PFD2015-182ME_ 2 4,21 @ 510 MHz 350 1,44 0,490 0,294 250
PFD2015-272ME_ 2 6,16 @ 660 MHz 380 2,16 0,410 0,477 250
PFD2015-332ME_ 2 7,14 @ 610 MHz 330 2,64 0,370 0,670 250
PFD2015-472ME_ 2 9,78 @ 460 MHz 230 3,76 0,260 1,000 250
PFD2015-682ME_ 2 14,18 @ 290 MHz 260 5,44 0,187 1,750 250
PFD2015-822ME_ 2 13,81 @ 250 MHz 170 6,56 0,150 2,500 250
PFD2015-103ME_ 2 14,73 @ 470 MHz 220 8,00 0,130 3,400 250
Hinweise
  1. When ordering, please specify packaging code: e.g. PFD2015-103MEC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

  • E = RoHS compliant silver-palladium-platinum-glass frit.
  • R = RoHS compliant matte tin over nickel over silver-platinum-glass frit(Special order, added cost)

Verpackung:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
  • B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
–40°C to +125°C
Lagertemperaturbereich:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (Ambient + temperature rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

schematic.png

Physikalische Eigenschaften

pfd2015d.gif
dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 7500* 178/330 60/100 13 14,4 8,4 8 8 4 2 1,63 0,23
* Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
13 – 23 mg
Winding to Winding Isolation:
250 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen

Verwandte Produktfamilien