Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD1260T Series

High-temperature Common Mode Chokes

RoHS-konform AEC-Q flag
Our MSD1260T Series high-temperature (AEC-Q200 Grade 1) common mode chokes provide both common-mode and differential-mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.
  • Common mode and differential mode filtering in a single device
  • Ideal for use in both power line and signal line applications
  • Up to 170 MHz differential mode cutoff frequency
  • AEC-Q200 Grade 1 (−40°C to +125°C)
Refer to Designing Common Mode Filters for design guidance.

Need parts for space, military or other critical applications?
See Coilcraft AE590PND Series | See Coilcraft ML590PND Series | See Coilcraft MS590PND Series
Jetzt kaufen:
Anzahl Einzelpreis
1 $2,93
250 $1,91
500 $1,16
1000 $0,90
2500 $0,77
5000 $0,72

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
MSD1260T-332ML_ 2 5,29 @ 53,0 MHz 170 2,6 3,60 0,020 500
MSD1260T-472ML_ 2 6,27 @ 43,0 MHz 140 3,8 3,16 0,036 500
MSD1260T-562ML_ 2 8,38 @ 36,0 MHz 91,0 4,5 3,00 0,040 500
MSD1260T-682ML_ 2 9,78 @ 33,0 MHz 120 5,4 2,75 0,048 500
MSD1260T-822ML_ 2 9,72 @ 30,0 MHz 110 6,6 2,63 0,052 500
MSD1260T-103ML_ 2 12,31 @ 26,0 MHz 110 8,0 2,45 0,060 500
MSD1260T-123ML_ 2 14,67 @ 23,0 MHz 81,0 9,6 2,21 0,074 500
MSD1260T-153ML_ 2 16,17 @ 21,0 MHz 77,0 12 2,06 0,085 500
MSD1260T-183ML_ 2 16,96 @ 18,0 MHz 64,0 14 1,93 0,097 500
MSD1260T-223ML_ 2 20,73 @ 17,0 MHz 79,0 18 1,76 0,116 500
MSD1260T-273ML_ 2 26,07 @ 15,0 MHz 58,0 22 1,70 0,124 500
MSD1260T-333ML_ 2 26,15 @ 12,0 MHz 58,0 26 1,64 0,134 500
MSD1260T-393ML_ 2 30,30 @ 12,0 MHz 36,0 31 1,59 0,142 500
MSD1260T-473ML_ 2 29,81 @ 11,0 MHz 53,0 38 1,44 0,174 500
MSD1260T-563ML_ 2 51,88 @ 9,6 MHz 33,0 45 1,35 0,198 500
MSD1260T-683ML_ 2 55,74 @ 8,6 MHz 25,0 54 1,29 0,216 500
MSD1260T-823ML_ 2 70,75 @ 8,2 MHz 26,0 66 1,15 0,274 500
MSD1260T-104ML_ 2 80,40 @ 7,3 MHz 17,0 80 1,06 0,322 500
MSD1260T-124KL_ 2 87,96 @ 6,2 MHz 27,0 108 0,93 0,418 500
MSD1260T-154KL_ 2 97,64 @ 5,4 MHz 45,0 135 0,87 0,476 500
MSD1260T-184KL_ 2 124,30 @ 5,2 MHz 23,0 162 0,82 0,536 500
MSD1260T-224KL_ 2 143,40 @ 4,3 MHz 25,0 198 0,72 0,691 500
MSD1260T-274KL_ 2 134,80 @ 4,3 MHz 11,0 243 0,67 0,806 500
MSD1260T-334KL_ 2 132,10 @ 3,6 MHz 35,0 297 0,57 1,090 500
MSD1260T-394KL_ 2 131,00 @ 3,4 MHz 14,0 351 0,55 1,200 500
MSD1260T-474KL_ 2 193,50 @ 3,3 MHz 21,0 423 0,48 1,590 500
MSD1260T-564KL_ 2 175,20 @ 2,7 MHz 15,0 504 0,45 1,810 500
MSD1260T-684KL_ 2 158,60 @ 2,7 MHz 11,0 612 0,42 2,060 500
MSD1260T-824KL_ 2 225,90 @ 2,2 MHz 9,2 738 0,37 2,650 500
MSD1260T-105KL_ 2 197,00 @ 2,3 MHz 15,0 900 0,34 3,060 500
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. MSD1260T-105KLC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

  • L = RoHS compliant matte tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • S = non-RoHS tin-lead (63/37)(Special order, added cost)

Verpackung:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform
Umgebungstemperaturbereich:
–40°C to +125°C with Irms current
Lagertemperaturbereich:
Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+165°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

schematic.png

Physikalische Eigenschaften

msd1260td_cm.gif

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_ak.gif
500 330 100 13 30,4 24,4 24 16 4 2 6,9 0,5

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
2.8 – 3.2 g
Verpackung:
500/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 6.9 mm pocket depth
Winding to Winding Isolation:
500 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested with pure water or alcohol only. More info.

Verwandte Produktreihen

Verwandte Produktfamilien