View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

3D Model Datasheet

MSD1260 Series

Common Mode Chokes

Our MSD1260 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.

Common mode and differential mode filtering in a single device
Ideal for use in both power line and signal line applications
Up to 180 MHz differential mode cutoff frequency
500 Vrms, one minute winding-to-winding isolation
AEC-Q200 Grade 3 (−40°C to +85°C)

Refer to Designing Common Mode Filters for design guidance.

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$2,68
250	$1,74
500	$1,05
1000	$0,81
2500	$0,70
5000	$0,64

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

M = 20%

Termination

L = Matte tin over nickel

Packaging

D = 13" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
MSD1260-472ML_	2	7,39 @ 43,0 MHz	180	3,8	3,16	0,036	500
MSD1260-562ML_	2	8,07 @ 33,0 MHz	160	4,5	3,00	0,040	500
MSD1260-682ML_	2	7,45 @ 21,0 MHz	100	5,4	2,75	0,048	500
MSD1260-822ML_	2	12,74 @ 27,0 MHz	120	6,6	2,63	0,052	500
MSD1260-103ML_	2	10,36 @ 19,0 MHz	95,0	8,0	2,45	0,060	500
MSD1260-123ML_	2	11,72 @ 18,0 MHz	74,0	9,6	2,21	0,074	500
MSD1260-153ML_	2	15,88 @ 21,0 MHz	75,0	12	2,06	0,085	500
MSD1260-183ML_	2	19,22 @ 17,0 MHz	58,0	14	1,93	0,097	500
MSD1260-223ML_	2	23,97 @ 17,0 MHz	68,0	18	1,76	0,116	500
MSD1260-273ML_	2	23,83 @ 13,0 MHz	48,0	22	1,70	0,124	500
MSD1260-333ML_	2	28,87 @ 13,0 MHz	43,0	26	1,64	0,134	500
MSD1260-393ML_	2	24,31 @ 11,0 MHz	39,0	31	1,59	0,142	500
MSD1260-473ML_	2	27,25 @ 10,0 MHz	45,0	38	1,44	0,174	500
MSD1260-563ML_	2	39,80 @ 8,9 MHz	33,0	45	1,35	0,198	500
MSD1260-683ML_	2	41,12 @ 7,7 MHz	31,0	54	1,29	0,216	500
MSD1260-823ML_	2	57,65 @ 8,0 MHz	31,0	66	1,15	0,274	500
MSD1260-104ML_	2	58,69 @ 6,5 MHz	21,0	80	1,06	0,322	500
MSD1260-124KL_	2	51,20 @ 4,9 MHz	24,0	108	0,93	0,418	500
MSD1260-154KL_	2	41,37 @ 4,0 MHz	29,0	135	0,87	0,476	500
MSD1260-184KL_	2	52,76 @ 4,3 MHz	19,0	162	0,82	0,536	500
MSD1260-224KL_	2	92,17 @ 4,5 MHz	33,0	198	0,72	0,691	500
MSD1260-274KL_	2	46,65 @ 3,3 MHz	27,0	243	0,67	0,806	500
MSD1260-334KL_	2	118,00 @ 3,4 MHz	32,0	297	0,57	1,090	500
MSD1260-394KL_	2	67,94 @ 2,4 MHz	14,0	351	0,55	1,200	500
MSD1260-474KL_	2	114,70 @ 2,7 MHz	13,0	423	0,48	1,590	500
MSD1260-564KL_	2	76,40 @ 2,3 MHz	11,0	504	0,45	1,810	500
MSD1260-684KL_	2	218,90 @ 2,5 MHz	14,0	612	0,42	2,060	500
MSD1260-824KL_	2	212,50 @ 2,2 MHz	4,9	738	0,37	2,650	500
MSD1260-105KL_	2	124,20 @ 1,8 MHz	6,6	900	0,34	3,060	500

Hinweise

When ordering, please specify termination and packaging codes: e.g. MSD1260-105KLC
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

L = RoHS compliant matte tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

D = 13" reel, machine-ready
EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel
In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +85°C with Irms current

Lagertemperaturbereich:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+125°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	330	100	13	30,4	24,4	24	16	4	2	6,9	0,5

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

2.8 – 3.2 g

Verpackung:

500/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 6.9 mm pocket depth

Winding to Winding Isolation:

500 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

MSD1260 Series

Common Mode Chokes