View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

LPD5030 Series

Common Mode Chokes

Coilcraft LPD5030 Series common mode chokes provide both common mode and differential mode filtering in a single miniature, low-profile device.

Low-profile miniature CM choke; measures only 4.8 mm square and 2.9 mm high
Common mode and differential mode filtering in a single device
Up to 490 MHz differential mode cutoff frequency
100 Vrms, one minute winding-to-winding isolation
AEC-Q200 Grade 3 (−40°C to +85°C)

Refer to Designing Common Mode Filters for design guidance.

Need parts for space, military or other critical applications?
See Coilcraft AR466PJD Series | See Coilcraft ML466PJD Series | See Coilcraft MS466PJD Series | See Coilcraft ST466PJD Series

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$1,14
375	$0,95
750	$0,65
1500	$0,55
3000	$0,45
6000	$0,42

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

N = 30%

Termination

R = Matte tin over nickel over silver

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
LPD5030-571NR_	2	0,47 @ 250 MHz	490	0,40	2,30	0,031	100
LPD5030-781NR_	2	0,69 @ 210 MHz	400	0,55	2,25	0,038	100
LPD5030-102NR_	2	1,03 @ 150 MHz	380	0,80	2,20	0,042	100
LPD5030-152MR_	2	1,48 @ 110 MHz	260	1,2	2,05	0,048	100
LPD5030-222MR_	2	1,90 @ 93,0 MHz	260	1,8	1,95	0,067	100
LPD5030-332MR_	2	3,84 @ 66,0 MHz	210	2,6	1,70	0,077	100
LPD5030-472MR_	2	4,34 @ 53,0 MHz	190	3,8	1,40	0,111	100
LPD5030-562MR_	2	6,28 @ 45,0 MHz	140	4,5	1,35	0,125	100
LPD5030-682MR_	2	7,10 @ 43,0 MHz	140	5,4	1,20	0,159	100
LPD5030-103MR_	2	11,58 @ 36,0 MHz	110	8,0	1,05	0,210	100
LPD5030-153MR_	2	16,01 @ 26,0 MHz	87,0	12	0,85	0,298	100
LPD5030-223MR_	2	20,32 @ 21,0 MHz	65,0	18	0,70	0,452	100
LPD5030-333MR_	2	34,28 @ 19,0 MHz	67,0	26	0,60	0,565	100
LPD5030-473MR_	2	37,00 @ 13,0 MHz	50,0	38	0,50	0,806	100
LPD5030-683MR_	2	47,73 @ 11,0 MHz	42,0	54	0,43	1,130	100
LPD5030-104MR_	2	74,28 @ 8,7 MHz	34,0	80	0,33	1,790	100
LPD5030-154MR_	2	83,32 @ 7,2 MHz	27,0	120	0,28	2,430	100
LPD5030-224MR_	2	119,70 @ 5,8 MHz	20,0	176	0,24	3,300	100
LPD5030-334MR_	2	180,50 @ 4,3 MHz	18,0	264	0,18	5,360	100
LPD5030-474MR_	2	231,10 @ 3,6 MHz	16,0	376	0,15	7,510	100
LPD5030-684MR_	2	285,90 @ 3,2 MHz	13,0	544	0,13	10,800	100
LPD5030-105MR_	2	355,20 @ 2,5 MHz	11,0	800	0,10	16,500	100

Hinweise

When ordering, please specify termination and packaging codes: e.g. LPD5030-224MRC
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

R = Matte tin over nickel over silver.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +85°C with Irms current

Lagertemperaturbereich:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+125°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	2500*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,1	0,32

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

210 – 225 mg

Winding to Winding Isolation:

100 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Empfohlene Bestückungsaufnahme:

OD: 5 mm; ID: ≤ 2.5 mm

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPD5030 Series

Common Mode Chokes