View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

3D Model Datasheet

ZE2401 Series

Low Profile Common Mode Chokes

Common mode choke suitable for use in FPD-Link III & FPDLink IV up to 13.5 Gbps link rates
Attenuate common mode signal with minimal effect on differential signal in forward channel and backchannel for maintaining stable signal integrity

Refer to Designing Common Mode Filters for design guidance.

Jetzt kaufen:

Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (GHz) 2	Gleichtakt- dämpfungsart (dB)			Induktivität min (nH) 3	Irms (mA) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (GHz) 2	10 MHz	100 MHz	500 MHz	Induktivität min (nH) 3	Irms (mA) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
ZE2401-AE_	2	0,16 @ 3,0 GHz	5,0	1,5	5,3	7,1	30	100	0,35	250

Hinweise

When ordering, please specify packaging code: e.g. ZE2401-AEC
Frequency at which the differential mode attenuation equals –3 dB.
Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
Irms: Current per winding that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
250 Vrms, 1 minute interwinding isolation (hipot).

Anschlüsse:

Matte tin over nickel over silver-palladium-glass frit.

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +125°C with Irms current.

Lagertemperaturbereich:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

140°C

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

Pläne/Diagramme

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,295	0,23

*Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

14.7 – 15.5 mg

Verpackung:

2000/7″ reel; 7500/13″ reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.295 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

ZE2401 Series

Low Profile Common Mode Chokes