View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

0603USB Series

Common Mode Choke

Our 0603USB Series common mode chokes eliminate virtually all common mode noise in USB 3.1 Gen 1, HDMI, IEEE 1394 and LVDS applications and support data rates up to 4.8 Gbit/s.

Eliminates virtually all common mode noise
Optimized for USB 3.1 Gen 1, HDMI, IEEE 1394 and LVDS applications
Supports data rates up to 4.8 Gbit/s.
Up to 3.7 GHz differential mode 3 dB cutoff frequency
Up to 0.7 kOhms common mode peak impedance and 20 dB common mode noise attenuation

Refer to Designing Common Mode Filters for design guidance.

Need parts for space, military or other critical applications?
See Coilcraft AR312FRA Series | See Coilcraft CP312FRA Series

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$0,74
200	$0,60
500	$0,37
1000	$0,29
2000	$0,25
4000	$0,23

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

M = 20%

Termination

L = Gold over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
C470	39 (10 of each)	$110,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (GHz) 2	Gleichtakt- dämpfungsart (dB)			Induktivität min (nH) 3	Irms (mA) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (GHz) 2	10 MHz	500 MHz	1 GHz	Induktivität min (nH) 3	Irms (mA) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
0603USB-251ML_	2	0,10 @ 3,0 GHz	3,8	1,31	3,16	8,45	18	500	0,077	250
0603USB-601ML_	2	0,18 @ 3,0 GHz	3,4	3,00	6,88	13,27	37	500	0,109	250
0603USB-951ML_	2	0,30 @ 2,6 GHz	2,8	4,62	9,75	16,06	63	500	0,142	250
0603USB-142ML_	2	0,42 @ 1,9 GHz	1,9	6,85	12,80	18,16	98	500	0,174	250
0603USB-222ML_	2	0,66 @ 1,8 GHz	0,96	9,14	16,53	20,29	150	500	0,209	250

Hinweise

When ordering, please specify packaging code: e.g. 0603USB-222MLC
Frequency at which the differential mode attenuation equals 3 dB
Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
Irms: Current per winding that causes a 20°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
250 Vrms, 1 minute interwinding isolation (hipot).

Anschlüsse:

Gold over nickel over silver-palladium-glass frit.

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +85°C with Irms current

Lagertemperaturbereich:

Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+105°C (Ambient + temperature rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs frequency

Pläne/Diagramme

Physikalische Eigenschaften

These parts are not marked.

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,14	0,23

*Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

4.9 – 5.2 mg

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

0603USB Series

Common Mode Choke