View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

PFD2015 Series

Miniature Common Mode Chokes

Our PFD2015 Series miniature common mode chokes provide both common mode and differential mode filtering in a single device that measures just 2.29 x 1.52 x 1.5 mm. They are ideal for use in both power line and signal line applications, providing 250 Vrms, one minute winding-to-winding isolation.

Common mode and differential mode filtering in a single device
Compact package measures just 2.29 x 1.52 x 1.5 mm
Ideal for use in both power line and signal line applications
Up to 550 MHz differential mode cutoff frequency
250 Vrms, one minute interwinding isolation

Refer to Designing Common Mode Filters for design guidance.

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$0,94
100	$0,76
250	$0,59
500	$0,41
1000	$0,34
2000	$0,29
5000	$0,27

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

M = 20%

Termination

R = Matte tin over nickel over silver-platinum-glass frit (Special order, added cost)

E = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

B = Less than full reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
PFD2015-102ME_	2	2,30 @ 400 MHz	550	0,80	0,800	0,165	250
PFD2015-122ME_	2	3,45 @ 350 MHz	560	0,96	0,750	0,175	250
PFD2015-182ME_	2	4,21 @ 510 MHz	350	1,44	0,490	0,294	250
PFD2015-272ME_	2	6,16 @ 660 MHz	380	2,16	0,410	0,477	250
PFD2015-332ME_	2	7,14 @ 610 MHz	330	2,64	0,370	0,670	250
PFD2015-472ME_	2	9,78 @ 460 MHz	230	3,76	0,260	1,000	250
PFD2015-682ME_	2	14,18 @ 290 MHz	260	5,44	0,187	1,750	250
PFD2015-822ME_	2	13,81 @ 250 MHz	170	6,56	0,150	2,500	250
PFD2015-103ME_	2	14,73 @ 470 MHz	220	8,00	0,130	3,400	250

Hinweise

When ordering, please specify packaging code: e.g. PFD2015-103MEC
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

E = RoHS compliant silver-palladium-platinum-glass frit.
R = RoHS compliant matte tin over nickel over silver-platinum-glass frit. (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +125°C

Lagertemperaturbereich:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+125°C (Ambient + temperature rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	8	4	2	1,63	0,23

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

13 – 23 mg

Winding to Winding Isolation:

250 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

PFD2015 Series

Miniature Common Mode Chokes