View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

3D Model Datasheet

MSD1260T Series

High-temperature Common Mode Chokes

Our MSD1260T Series high-temperature (AEC-Q200 Grade 1) common mode chokes provide both common-mode and differential-mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.

Common mode and differential mode filtering in a single device
Ideal for use in both power line and signal line applications
Up to 170 MHz differential mode cutoff frequency
AEC-Q200 Grade 1 (−40°C to +125°C)

Refer to Designing Common Mode Filters for design guidance.

Need parts for space, military or other critical applications?
See Coilcraft AE590PND Series | See Coilcraft ML590PND Series | See Coilcraft MS590PND Series

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$2,93
250	$1,91
500	$1,16
1000	$0,90
2500	$0,77
5000	$0,72

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

M = 20%

Termination

L = Matte tin over nickel

S = Non-RoHS tin-lead (63/37) (Special order, added cost)

Packaging

D = 13" machine-ready reel

B = Less than full reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
MSD1260T-332ML_	2	5,29 @ 53,0 MHz	170	2,6	3,60	0,020	500
MSD1260T-472ML_	2	6,27 @ 43,0 MHz	140	3,8	3,16	0,036	500
MSD1260T-562ML_	2	8,38 @ 36,0 MHz	91,0	4,5	3,00	0,040	500
MSD1260T-682ML_	2	9,78 @ 33,0 MHz	120	5,4	2,75	0,048	500
MSD1260T-822ML_	2	9,72 @ 30,0 MHz	110	6,6	2,63	0,052	500
MSD1260T-103ML_	2	12,31 @ 26,0 MHz	110	8,0	2,45	0,060	500
MSD1260T-123ML_	2	14,67 @ 23,0 MHz	81,0	9,6	2,21	0,074	500
MSD1260T-153ML_	2	16,17 @ 21,0 MHz	77,0	12	2,06	0,085	500
MSD1260T-183ML_	2	16,96 @ 18,0 MHz	64,0	14	1,93	0,097	500
MSD1260T-223ML_	2	20,73 @ 17,0 MHz	79,0	18	1,76	0,116	500
MSD1260T-273ML_	2	26,07 @ 15,0 MHz	58,0	22	1,70	0,124	500
MSD1260T-333ML_	2	26,15 @ 12,0 MHz	58,0	26	1,64	0,134	500
MSD1260T-393ML_	2	30,30 @ 12,0 MHz	36,0	31	1,59	0,142	500
MSD1260T-473ML_	2	29,81 @ 11,0 MHz	53,0	38	1,44	0,174	500
MSD1260T-563ML_	2	51,88 @ 9,6 MHz	33,0	45	1,35	0,198	500
MSD1260T-683ML_	2	55,74 @ 8,6 MHz	25,0	54	1,29	0,216	500
MSD1260T-823ML_	2	70,75 @ 8,2 MHz	26,0	66	1,15	0,274	500
MSD1260T-104ML_	2	80,40 @ 7,3 MHz	17,0	80	1,06	0,322	500
MSD1260T-124KL_	2	87,96 @ 6,2 MHz	27,0	108	0,93	0,418	500
MSD1260T-154KL_	2	97,64 @ 5,4 MHz	45,0	135	0,87	0,476	500
MSD1260T-184KL_	2	124,30 @ 5,2 MHz	23,0	162	0,82	0,536	500
MSD1260T-224KL_	2	143,40 @ 4,3 MHz	25,0	198	0,72	0,691	500
MSD1260T-274KL_	2	134,80 @ 4,3 MHz	11,0	243	0,67	0,806	500
MSD1260T-334KL_	2	132,10 @ 3,6 MHz	35,0	297	0,57	1,090	500
MSD1260T-394KL_	2	131,00 @ 3,4 MHz	14,0	351	0,55	1,200	500
MSD1260T-474KL_	2	193,50 @ 3,3 MHz	21,0	423	0,48	1,590	500
MSD1260T-564KL_	2	175,20 @ 2,7 MHz	15,0	504	0,45	1,810	500
MSD1260T-684KL_	2	158,60 @ 2,7 MHz	11,0	612	0,42	2,060	500
MSD1260T-824KL_	2	225,90 @ 2,2 MHz	9,2	738	0,37	2,650	500
MSD1260T-105KL_	2	197,00 @ 2,3 MHz	15,0	900	0,34	3,060	500

Hinweise

When ordering, please specify termination and packaging codes: e.g. MSD1260T-105KLC
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

L = RoHS compliant matte tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +125°C with Irms current

Lagertemperaturbereich:

Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+165°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	330	100	13	30,4	24,4	24	16	4	2	6,9	0,5

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

2.8 – 3.2 g

Verpackung:

500/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 6.9 mm pocket depth

Winding to Winding Isolation:

500 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested with pure water or alcohol only. More info.

MSD1260T Series

High-temperature Common Mode Chokes