View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

Datasheet 3D-Modelle

M2022 Series

Common Mode EMI/RFI Filter

Our M2022 Series common mode EMI/RFI filters provide both common-mode and differential-mode filtering in a single 1812-size surface mount package. They are available in standard (-AL), low-profile (-ALPL) and shielded (-ASL) versions, all offering excellent isolation, environmental stability and low cost.

Common mode and differential mode filtering in a single device
Compact 1812-size surface mount package
Standard (-AL), low profile (-ALPL) and shielded (-ASL) versions available
Excellent isolation, environmental stability and low cost
RoHS-compliant. 260°C compatible. Gold over nickel over moly-manganese terminals

Refer to Designing Common Mode Filters for design guidance.

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$2,08
300	$1,59
600	$1,19
1200	$0,88
2400	$0,68
4800	$0,52

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

L = Gold over nickel over moly-manganese

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (mA)	DCR max (mΩ) 4	Isolations- spannung (Vrms) 5
Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (mA)	DCR max (mΩ) 4	Isolations- spannung (Vrms) 5
M2022-AL_	2	38,3 @ 120 MHz	170	3,8	500	800	50
M2022-ALPL_	2	40,0 @ 160 MHz	120	3,6	500	990	50
M2022-ASL_	2	32,0 @ 66,0 MHz	140	11,5	500	850	50

Hinweise

When ordering, please specify packaging codes: e.g. M2022-ALC, M2022-ALPLC, or M2022-ASLC.
Frequency at which the differential mode attenuation equals 3 dB
Inductance is per winding, measured at 10 MHz.
DCR is per winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Winding to winding isolation (hipot) tested for one minute.

Anschlüsse:

RoHS compliant gold over nickel over moly-manganese.

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +85°C

Lagertemperaturbereich:

Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

Physikalische Eigenschaften

M2022-A, M2022-ALP

M2022-AS
m2022as-(1).gif

	A max	B max	C max	D ref	E ref	F ref	G min	H
M2022-AL	0.195	0.150	0.135	0.070	0.100	0.178	0.04	0.03
M2022-AL	4,95	3,81	3,43	1,78	2,54	4,52	1,02	0,76
M2022-ALPL	0.195	0.150	0.079	0.070	0.100	0.178	0.04	0.03
M2022-ALPL	4,95	3,81	2,01	1,78	2,54	4,52	1,02	0,76
M2022-ASL	0.231	0.196	0.150	0.107	0.100	0.178	0.04	0.03
M2022-ASL	5,87	4,98	3,81	2,72	2,54	4,52	1,02	0,76

Gurt/Rolle-Spezifikationen

Parts per reel			Reel dimensions (mm)					Tape dimensions (mm)
	7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
M2022-AL	600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,7	0,3
M2022-ALPL	600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,25	0,3
M2022-ASL	600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,94	0,25

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

M2022-AL 155 mg; M2022-ALPL 85.5 mg; M2022-ASL 319 mg

Verpackung:

600 per 7″ reel; 2200 per 13″ reel
Plastic tape: 12 mm wide, 8 mm pocket spacing
M2022-AL: 0.3 mm thick, 3.7 mm pocket depth
M2022-ALP: 0.3 mm thick, 2.25 mm pocket depth
M2022-AS: 0.25 mm thick, 3.94 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

M2022 Series

Common Mode EMI/RFI Filter