View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

Datasheet 3D-Modelle

CDF Series

Surface Mount, 10- and 8-Line Data Line EMI Filters

Our CDF Series virtually eliminates conducted EMI in data line applications. It provides common mode and differential mode noise attenuation and reduces noise by a factor of 32 from 15 MHz to 300 MHz for up to 10 lines (5 pairs).

Virtually eliminates the problem of conducted EMI in data line applications
Provides common mode and differential mode noise attenuation
Reduces noise by a factor of 32 from 15 MHz to 300 MHz
Excellent environmental stability and low cost
300 Vrms isolation (hipot) for one minute

Consider our PDLF Series for 4-, 3- and 2-line applications

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$4,38
100	$3,76
250	$3,28
500	$2,85
1000	$2,21
3000	$1,99
5000	$1,81

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

L = Tin-silver-copper over tin over nickel

Packaging

D = 13" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
D303	17 (4 of each)	$75,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (mA) 4	DCR max (mΩ) 5	Isolations- spannung (Vrms) 6
Teilenummer 1	Leitungen	Gleichtakt- spitzenimpedanz (kΩ)	Grenz- frequenz (MHz) 2	Induktivität min (µH) 3	Irms (mA) 4	DCR max (mΩ) 5	Isolations- spannung (Vrms) 6
CDF10000L_	10	0,52 @ 0,043 GHz	43,0	5,0	100	250	300
CDF8000L_	8	0,63 @ 0,037 GHz	53,0	5,0	100	250	300
CDF8500L_	8	0,52 @ 0,042 GHz	53,0	5,0	500	180	300

Hinweise

When ordering, please specify termination and packaging codes: e.g. CDF10000LD.
Frequency at which the differential mode attenuation equals 3 dB
Inductance is per winding, tested at 1 MHz.
Current rating is for each line.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

L = RoHS compliant tin-silver-copper over tin over nickel over phos bronze.
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

D = 13" machine ready reel
EIA-481 embossed plastic tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel.
In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +85°C

Lagertemperaturbereich:

Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Attenuation (Ref: 50 Ohms) CDF8x00

Impedance vs Frequency CDF10000

Attenuation (Ref: 50 Ohms) CDF10000

Impedance vs Frequency CDF8x00

Pläne/Diagramme

Physikalische Eigenschaften

CDF8X00L

S	L	W	S1
0.199	0.067	0.037	0.199	inches
5,05	1,70	0,95	5,05	mm

Note: Location of the wire slots for parts manufactured prior to August 2017 may be different.

CDF10000L

S	L	W	S1
0.250	0.063	0.035	0.250	inches
6,35	1,60	0,90	6,35	mm

Gurt/Rolle-Spezifikationen

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1000	330	100	13	22,4	16,4	16	12	4	2	4,5	0,46

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

330 – 345 mg

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

CDF Series

Surface Mount, 10- and 8-Line Data Line EMI Filters