Datasheet 3D Models

HP4 Series

Hexa-Path Magnetics

Six 1 : 1 isolated windings that can be connected in series or parallel
Tightly coupled windings
500 Vrms isolation between each winding
UL1446 Class F (155°C) Insulation System (UL File E83628)
Power range: 5 – 50 Watts as inductor and flyback transformer;
up to 150 Watts as forward transformer
Frequency range up to 1 MHz

Buy Now:

Part number

Find my part

Count	Unit price
1	$7.87
100	$7.16
200	$3.52
600	$3.07
1000	$2.87
2400	$2.80
5000	$2.69

For high volume or non-stock items, request a quote.

Termination

L = Tin-silver over tin over nickel

Packaging

D = 13" machine-ready reel

. in stock, ready to ship today.

Request a Sample:

Part number

Find my part

Specifications

Electrical specifications at 25°C.

Part number 1	Inductance (µH) 2	Tolerance (%)	DCR max (mΩ) 3	Volt-time product (V-µs) 4	Peak energy storage (µJ) 5	Isat (A) 6	Irms (A) 7
HP4-0047L_	3.8	5	55.0	47.3	490	3.2	1.9
HP4-0060L_	4.9	10	55.0	47.3	386	2.5	1.9
HP4-0075L_	6.1	15	55.0	47.3	307	2.0	1.9
HP4-0140L_	11	20	55.0	47.3	142	1.0	1.9
HP4-1150L_	93	25	55.0	47.3	Note 8	Note 8	1.9
HPH4-0047L_	7.9	5	78.0	68.3	529	2.3	1.7
HPH4-0060L_	10	10	78.0	68.3	368	1.7	1.7
HPH4-0075L_	13	15	78.0	68.3	314	1.4	1.7
HPH4-0140L_	24	20	78.0	68.3	138	0.68	1.7
HPH4-1150L_	194	25	78.0	68.3	Note 8	Note 8	1.7

Notes

When ordering, please specify packaging code: e.g. HPH1-1400LD
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc.
DCR is per winding, measured at 25°C on Cambridge Technology micro-ohmmeter or equivalent. For other operating temperatures,use this DCR at Temperature calculator.
Volt-time product is for a single winding or multiple windings connected in parallel. To calculate volt-time product for windings connected in series, multiply the value specified in the table by the number of windings connected.
Peak energy storage is for any combination of windings, assuming saturation current applied. See note 6 for definition of saturation current.
Isat: DC current at which the inductance drops 30% typ from its value without current, based on current applied to all six windings connected in series. For applications where all windings are not connected in series, use the following equation to calculate Isat: Isat = Isat(table) × 6 ÷ number of windings in series.
Irms: Current that causes a 40°C rise from 25°C ambient due to self heating, tested with continuous current flow through all windings connected in series. Application temperature rise will depend on the operating current, duty cycle, and winding connection.
Part is designed exclusively for use as a forward converter transformer and was not tested for energy storage and saturation current.

Termination:

L = RoHS compliant tin-silver over tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Packaging:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

Environmental

Environmental:

RoHS compliant

Ambient temperature range:

−40°C to +85°C with Irms current

Storage temperature range:

Component: −40°C to +125°C
Packaging tape and reel or tray: −40°C to +80°C

Maximum part temperature:

+125°C (Ambient + temperature rise)

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Physical characteristics

Tape and Reel specification

	Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T	Orientation
HP4 / HPH4	200	330	100	13	50.4	44.4	44	24	4	2	10.56	0.4

General specification

Core Material:

Ferrite

Weight:

6.8 – 7.5 g

Packaging:

200 per 13" reel

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

Refer to Soldering Coilcraft Components before soldering.

PCB Washing:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

HP4 Series

Hexa-Path Magnetics

Specifications

Termination:

Packaging:

Physical characteristics

Tape and Reel specification

General specification

Soldering/Washing

Related product series

HP1 Series

HP2 Series

HP3 Series

HP5 Series

HP6 Series

Warehouses

Language settings

Currency settings

HP4 Series

Hexa-Path Magnetics

Selected configuration not available

Specifications

Termination:

Packaging:

Physical characteristics

Tape and Reel specification

General specification

Soldering/Washing

Related product series

HP1 Series

HP2 Series

HP3 Series

HP5 Series

HP6 Series

Warning