KA4909-AL

Bias Injection Choke

Coilcraft's KA4909-AL bias injection choke was developed for use with Texas Instruments DS90UB901Q serializer and DS90UB902Q deserializer for Low-Voltage Differential Signaling (LVDS) applications. It provides more than 1 kOhm of impedance from 1 MHz – 800 MHz.

Provides over 1 kOhm impedance from 1 MHz – 800 MHz.
Developed for use with Texas Instruments DS90UB901Q serializer and DS90UB902Q deserializer for Low-Voltage Differential Signaling (LVDS) applications.
Can be used with additional 10 µH and 1 µH inductors to achieve even wider band differential signal rejection.
AEC-Q200 Grade 3 (−40°C to +85°C)

Buy Now:

Request a Sample:

Specifications

Electrical specifications at 25°C.

Part number 1	Inductance (µH) 2 (Tolerance: ±25%)	DCR max (Ω) 3	Irms (mA) 4
Part number 1	Inductance (µH) 2 (Tolerance: ±25%)	DCR max (Ω) 3	Irms (mA) 4
KA4909-AL_	169	0.46	650

Notes

When ordering, please specify packaging codes: e.g. KA4909-ALC
Inductance measured from pin 1 to 3 at 100 kHz, 0.007 Vrms, 0 Adc
DCR measured from pin 1 to 3 at 25°C. For other operating temperatures, use this DCR at Temperature calculator
Irms: Current that causes 20°C temperature rise from 25°C ambient. Details

Termination:

RoHS compliant tin-silver-copper over tin over nickel over phos bronze.

Packaging:

C = 7″ machine ready reel. EIA-481 embossed plastic tape, 250 parts per full reel. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

Environmental

Environmental:

RoHS compliant

Ambient temperature range:

−40°C to +105°C

Storage temperature range:

Component: −40°C to +105°C
Tape and reel packaging: −40°C to +80°C

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Performance curves

Z vs Frequency

Physical characteristics

Tape and Reel specification

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (300mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	1000*	178/330	60/100	13	24,4	16,4	16	12	4	2	5.0	0,35

General specification

Core Material:

Ferrite

Weight:

220 mg

Packaging:

250/7″reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 5.0 mm pocket depth

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

Refer to Soldering Coilcraft Components before soldering.

PCB Washing:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. Other solvents.

Warehouses

Language settings

Currency settings

KA4909-AL

Bias Injection Choke

Selected configuration not available

Specifications

Termination:

Packaging:

Performance curves

Z vs Frequency

Physical characteristics

Tape and Reel specification

General specification

Soldering/Washing

Warning