View:
Introduction
Specifications
Environmental
Performance curves
Schematics
Physical characteristics
Tape & Reel
Soldering/Washing

3D Model Datasheet

MSD1583 Series

Common Mode Chokes

Our MSD1583 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.

Common- and differential-mode filtering in a single device
Ideal for use in both power line and signal line applications
Up to 44 MHz differential mode cutoff frequency
500 Vrms, one minute winding-to-winding isolation

Refer to Designing Common Mode Filters for design guidance.

Buy Now:

Part number

Find my part

Count	Unit price
1	$3.95
300	$2.59
600	$1.56
1200	$1.21
2400	$1.04
4800	$0.96

For high volume or non-stock items, request a quote.

Termination

E = Matte tin over nickel

Packaging

D = 13" machine-ready reel

Tolerance

M = 20%

. in stock, ready to ship today.

Request a Sample:

Part number

Find my part

Specifications

Electrical specifications at 25°C.

Part number 1	Lines	Common mode peak impedance (kΩ)	Cutoff frequency (MHz) 2	Inductance min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolation Voltage (Vrms) 6
Part number 1	Lines	Common mode peak impedance (kΩ)	Cutoff frequency (MHz) 2	Inductance min (µH) 3	Irms (A) 4	DCR max (Ω) 5	Isolation Voltage (Vrms) 6
MSD1583-103ME_	2	10.86 @ 17.0 MHz	38.0	8.0	3.68	0.031	500
MSD1583-123ME_	2	12.11 @ 16.0 MHz	30.0	9.6	3.54	0.037	500
MSD1583-153ME_	2	12.31 @ 14.0 MHz	25.0	12	3.18	0.045	500
MSD1583-183ME_	2	15.77 @ 13.0 MHz	25.0	14	3.04	0.048	500
MSD1583-223ME_	2	14.47 @ 12.0 MHz	28.0	18	2.44	0.065	500
MSD1583-333ME_	2	33.82 @ 9.0 MHz	28.0	26	2.16	0.095	500
MSD1583-473ME_	2	39.79 @ 7.6 MHz	23.0	38	1.98	0.115	500
MSD1583-683ME_	2	49.24 @ 5.9 MHz	17.0	54	1.56	0.165	500
MSD1583-104KE_	2	69.83 @ 5.0 MHz	16.0	90	1.24	0.260	500
MSD1583-154KE_	2	73.09 @ 3.9 MHz	12.0	135	1.06	0.380	500
MSD1583-224KE_	2	78.91 @ 3.3 MHz	9.7	198	0.92	0.460	500
MSD1583-474KE_	2	104.90 @ 2.2 MHz	7.4	423	0.65	1.040	500
MSD1583-105KE_	2	129.00 @ 1.5 MHz	5.8	900	0.42	2.400	500

Notes

When ordering, please specify termination and packaging codes: e.g. MSD1583-105KEC
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

Termination:

E = RoHS compliant matte tin over nickel over phos bronze.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

Packaging:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

Environmental

Environmental:

RoHS compliant , halogen free

Ambient temperature range:

–40°C to +85°C with Irms current

Storage temperature range:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

Maximum part temperature:

+125°C (ambient + temp rise)

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Performance curves

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

Schematics

Physical characteristics

Tape and Reel specification

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
300	330	100	13	38,4	32,4	32	24	4	2	8,6	0,5

General specification

Core Material:

Ferrite

Weight:

3.7 – 4.4 g

Winding to Winding Isolation:

500 Vrms, one minute

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Refer to Soldering Coilcraft Components before soldering.

PCB Washing:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

MSD1583 Series

Common Mode Chokes